Unit Installation - Cyclo Vac E Serie Manuel D'instructions

Unit Installation

Using the mounting plate provided with
your vacuum cleaner, secure the unit to the
wall (figure 1), at a height allowing easy
access to change the bag (see pages 6
and 8).
The connections to the piping system will
require some basic tools: a mitre box and
small saw or a pipe cutter (figure 2). See
pages 9 and 10 for general instructions
pertaining to the preparation of PVC
pipes. To simplify matters, installation
kits, including necessary fittings, pipes,
glue and low voltage wiring, as well as a
detailed instructions booklet, are available
from Cyclo Vac service centers.
Contrary to all other connections in the
piping system, do not glue the last fitting
to your unit. Cyclo Vac central vacuums
are equipped with an adjustable air intake
valve (figure 3), which does not require
glue. An air-tight fit is achieved with the
screw-type adjustment on the fitting itself.
Installation
figure 1
figure 2
figure 3
9