Electric Connections - Cyclo Vac E Serie Manuel D'instructions

There should be an electric outlet within 1 meter (3 feet) of your central vacuum
unit. Once the appliance is installed in a suitable location, connect your central
unit to an electric outlet on an dedicated* grounded circuit. Do not use extension
cords or modify the length of your vacuum cleaner's power cord.
DEDICATED* GROUNDED CIRCUIT
120 V / 240 V all models : 15 A
220 V / 240 V models 5011 et 7011 : 15 A
220 V / 240 V models 711 et 2011 : 10 A
220 V / 240 V models Axess, 111, 211, 311 : 8 A
Your central vacuum cleaner has a thermal safety device or a circuit breaker to
protect against any over voltage or electrical defect. If that protection should fail,
contact your authorized service center.
*Please reserve a circuit breaker dedicated only to the connections for your
central vacuum.
If you find that installing your vacuum cleaner is too difficult, ask your service
center to install it for you. When in doubt, it is better to have the work done by a
professional and ensure that the unit is properly installed. Any installation that
does not comply with the specified norms could alter or invalidate the warranty.

Electric Connections

Installation 15