Installation; Muffler Installation - Cyclo Vac E Serie Manuel D'instructions

1. Insert the rubber coupling on the vacuum air exhausts.
2. Using a Phillips screwdriver, tighten the clamp collar to ensure
adequate sealing.
3. Insert the 90° elbow into the rubber coupling, and tighten then clamp
collar as per instructions in step 2.
4. Apply ABS glue to the 90° elbow and insert muffler.
AXESS - GS110 & GS111 MODELS
C
Glue not included.
210, 211, 310, 311, 710, 711, 2010 ET 2011 MODELS

Muffler Installation

B
A
D
A
D

Installation

A. Rubber coupling
B. 90° elbow
C. Muffler
D. Air Exhaust
C
B
Glue not included.
A
13