EUROM ALUTHERM 1000 Wi-fi Manuel D'utilisation page 25

experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
24. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a
common cause of overheating. Make sure these deposits are removed regularly.
25. Do not turn on the appliance if you have discovered damage to the appliance
itself, the cord or the plug, if the appliance is malfunctioning, if it has been
dropped or if there are any other signs of a defect. Return the complete product
to the vendor or to a certified electrician for inspection and/or repair. Always ask
for the original parts.
26. Do not use attachments and/or accessories that have not been recommended or
supplied by the manufacturer.
27. The appliance (incl. cord and plug) may only be opened and/or repaired by
properly authorised and qualified persons.
28. Only use this heater for its intended purpose and as described in this instruction
manual.
Not abiding by instructions 26, 27 & 28 may lead to damage, fire an/or personal
injuries. A failure to adhere to these rules also immediately nullifies the guarantee
and vendor, importer and/or manufacturer do not take responsibility for any of the
consequences!
Description
The LED-display (3) has 4 lines:
1st line:
- 3 suns, that indicate whether the heater is set to low, medium or high capacity.
- The wifi symbol. If there is a wifi connection, this symbol will stay on.
" "
- P : thermostat function or working according to weekly timer.
" "
- M : working on set capacity.
2nd line:
- SET indicates that a day or time can be set.
- ON indicates that the heater is switched on.
25
1. Heat outlet grille
2. Air inlet grille
3. Operating panel
and LED display
4. Main switch
5. Remote control