Dremel 3D20 Idea Builder Consignes De Sécurité/D'utilisation page 13

DM 2610035691 07-14_3D20 7/3/14 2:41 PM Page 13
UNPACKING
1. Place box on table and cut tape.
2. Lift outer box and allow inner box to open.
3. Remove carton lid from top of your Dremel
3D20.
4. Rectangular carton on top of your Dremel
3D20 contains product manual, quick-start
guide, and set-up pieces. Remove the kit
contents located inside.
5. Using a firm grip, lift your Dremel 3D20 out of
packaging and place gently on stable work
surface.
6. Remove plastic lid from top of your Dremel
3D20.
7. Remove tape from your Dremel 3D20 door.
8. Remove inserts from inside of your Dremel
3D20.
Tip: Keep packaging for future transportation
and storage.
13