Télécharger Imprimer la page

Krups Prep&Cook XL HP50A8 Mode D'emploi page 47

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CLEANING YOUR APPLIANCE
The appliance should not be
immersed. Never put the motor unit
(A) under running water.
Once you have finished using it, discon-
nect the appliance.
„ Clean the bowl immediately after use to
avoid staining.
„ Press the locks (D2) then lift the bowl as-
sembly (D).
„ Place the bowl on a flat surface.
„ Unlock the lid by rotating one quarter of a
turn clockwise. Carefully remove the lid.
„ The elements of the lid (seal, seal holder
and lid) are removable. When the parts are
cooled down, unclip the seal holder of the
lid by sliding the end of the spatula han-
dle (G) between the two parts to separate
them (See Fig. 15).
„ Take care with the knives of the ultra-
blade blade (F1) and the kneading /
grinding knife (F4) when you are clean-
ing them and when you empty the bowl,
they are extremely sharp.
„ When the parts have cooled down:
- dismantle the spindle (D3), the seal (D4)
and the locking ring (D5) (See Fig. 13).
- clean the bowl (D), the spindle (D3), the
seal (D4), the locking ring (D5), the ac-
cessories (F1), (F2), (F3), (F4), (F5), the
steam regulator cap (E1), the lid (E2), the
seal holder (E3) and the seal (E4) using a
sponge and some soapy water.
92
„ Rinse these different parts under running
water.
„ If there is a build up of limescale in the
bowl, use a damp sponge and, if neces-
sary, white vinegar or cleaning products
suitable for stainless steel.
„ For food stuck in the bowl, leave the bowl
to soak for several hours in water with a
little washing up liquid and dishwashing
detergent and scrape, if necessary, with
a spatula (G) or with the abrasive side of
a sponge.
„ To clean the motor unit (A), use a damp
cloth. Dry carefully.
„ To help you with cleaning, the bowl, lid
assembly and accessories are dishwash-
er safe, with the exception of the spindle
(D3 and D4) and the locking ring (D5)
(See Fig. 14).
„ The accessories, the detachable spindle
(D3) and the parts of the lid may become
slightly discoloured with certain ingredi-
ents such as curry, carrot juice, etc; this
does not represent any danger for your
health or for the operation of your appli-
ance. To avoid this, clean these parts im-
mediately after use.
„ Before using the bowl (D), make sure that
the electrical contacts under the bowl are
clean and dry.
„ To avoid altering the materials of the bowl
(D), ensure that you respect the instruc-
tions for use of your dishwasher, do not
increase the dose of dishwasher salt or
dishwashing products.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
CAUSES
Insufficient cooking time.
Problems when steam
cooking.
The steam regulator cap is not
properly positioned or is missing.
Poor cooking results
Unsuitable recipes
in Manual mode
It is not plugged in.
The switch (H) is in position 0.
The appliance does not
work.
The bowl or the lid are not
correctly positioned or locked.
The lid does not lock.
The lid is not fully assembled.
SOLUTIONS
Cooking times are only a guide and
approximate. However, certain conditions
may affect the cooking time:
- size of the vegetables (cut or uncut)
- quantity of ingredients in the basket
- type of vegetables, their ripeness
- quantity of water in the bowl, which cor-
responds to the measurement (0.7l).
If the food is not properly cooked, you can
set an additional cooking time.
You can also use the manual mode by
selecting a temperature of 130°C and the
cooking time according to the quantity
and type of ingredients.
Set the steam regulator cap to 'maxi
steam' (turn towards you); this setting
allows a maximum amount of steam
to build up in the bowl for all types
of steam cooking (soups, etc.), so
there will be more steam in the bowl
and the cooking process will be more
efficient. This position also helps to
avoid splashing during cooking. The
'mini steam' position allows a maximum
amount of condensation to escape and
is recommended when making sauces
and dishes such as risotto, egg custard
desserts, etc.
The "zero" position is used to fasten and
remove the lid steam regulator stopper.
Your recipes, either personal or taken from
the Internet may not be suited to your
appliance and its accessories (quantities,
cooking time, duration, inadequate
accessories). Before starting your recipe,
make sure you follow the instructions of
use provided in this manual.
Plug the appliance into an electrical
socket.
Move the switch to position 1.
Check that the bowl or the lid are correctly
positioned and locked according to the
diagrams in the instruction manual.
Check that the seal is correctly
assembled on the seal holder and that
the seal holder is fully pushed onto the lid
in all places.
93

Publicité

loading

Ce manuel est également adapté pour:

Prep&cook xl hp50a815