Before Using; Using Your Appliance - Krups FDK4 Mode D'emploi

Masquer les pouces Voir aussi pour FDK4:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
A Fixed plates with non-stick coating
(depending on model):
A1 intersecting sandwich plates
A2 croque-monsieur / madeleine plates
Put the appliance on a firm surface.

Before using:

„ Fully unwind the lead.
„ Open the appliance.
„ Remove all packaging, labels or accessories from the inside and outside of the appliance.

Using your appliance

„ Close the appliance.
„ Check that the switch is set at 0.
„ Connect the lead to the mains. Set the switch (f) to on (position 1). The red light (d) comes
on (1).
„ Leave the appliance to pre-heat: the green light (e) comes on when the cooking
temperature has been reached (2).
„ Open the appliance and place the prepared items on the plates.
„ Close the appliance. The appliance locking clip adjusts to the thickness of the different
types of food (3).
„ Leave the food to cook for the required time.
„ When cooking croque-monsieur, it is normal for the green light to switch on and off
intermittently.
„ At the end of cooking, switch the appliance off by pressing 0. Then disconnect the plug.
„ Leave to cool for 2 hours.
Practical tips
The cooking time varies according to the humidity of the bread and the type of garnish
used.
In any case, it is advisable to check the cooking according to your taste.
When cooking has ended, remove the croque-monsieur using a wooden spatula.
„ Always disconnect the appliance before cleaning, and leave to cool completely.
„ Do not immerse the appliance.
17
DESCRIPTION
B Thermo-insulating handle
C Locking clip
D Appliance switched on light
E Setting light
F Switch
INSTRUCTIONS
CLEANING

Publicité

Table des Matières
loading

Table des Matières