Krups Prep&Cook XL HP50A8 Mode D'emploi page 44

USING THE CONTROL PANEL (B)
Selecting an automatic program:
Sauces
Soups
(P1 for smooth soup / P2 for
soup with a coarser texture.)
Slow cook (stews)
(P1 for vegetable stews / P2
for meat and poultry stew /
P3 for risotto)
Selecting custom settings:
Selecting the motor speed.
2 intermittent speeds (Speed 1 &
2) and 10 continuous progressive
speeds (Speed 3 to 12)
Selecting cooking temperature
From 30° to 150°C.
Heating indicator light: it lights up
when cooking starts and switches
off when the temperature inside
the bowl falls to below 50°C.
Selecting operating time.
From 5 sec to 2 hours.
Selecting the turbo functions
(continuous maximum speed)
and pulse (intermittent operation)
without using other settings.
86
Steam cooking
(P1 gentle steam / P2
high steam)
Pastry
(P1 for bread / P2 for
brioche / P3 for cake)
Desserts
Increase speed, cooking
temperature and duration.
Decrease speed, cooking
temperature and duration.
This button has 3 functions:
- "Validation" of the
choice of your automatic
program or your settings
chosen in the context of
manual use (speed, cook-
ing temperature time).
- "Pause" during use, once
the appliance has been
started up.
- "Reset" of the settings
selected on the appliance
by pressing for 2 sec-
onds.
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability.
In the event of instability, the motor rotation speed will be automatically reduced, if this
instability continues, the motor will be stopped and "STOP" will be displayed on the
screen. If this happens:
„ Check that the quantity of ingredients is not too large and that the speed used is the
correct one.
„ Check that you are using the recommended accessory.
„ Then restart your appliance normally.
USING THE APPLIANCE
Plug in the appliance, set the On/Off switch (H) to 1, and the LCD screen (C) displays all
settings at "0" (See Fig. 9)
AUTOMATIC PROGRAM MODE
87