Cisco Linksys WUSB54GC Mode D'emploi page 9

Chapter 3
Checking Connection screen appears.
5. The
Checking Connection
Connected to Your Network screen appears. If you
6. The
want the Wireless Manager to save your network's
settings, click Remember this network. Click Finish
to exit the Wireless Manager.
NOTE:
Saving a hidden network's settings will
make it easier to reconnect to the network.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
Compact Wireless-G USB Adapter
Advanced Configuration
How to Connect Using Wi-Fi Protected Setup
On the Connect to a Wireless Network screen, the Wi-Fi
Protected Setup icon ( ) indicates a network that supports
Wi-Fi Protected Setup. Follow these instructions to connect
to a wireless network using Wi-Fi Protected Setup.
NOTE: Before you begin, make sure the router
and the computer with the Adapter are in the
same room.
1. Select your network in the
Network screen, and then click Connect.
Select the Wireless Network
Quickly Connect Using Push Button screen appears.
2. The
Quick Connect Using Push Button
3. Press the router's Wi-Fi Protected Setup button
If your router does not have this button, click Skip and
go to Enter the Adapter's PIN Number, page 9.
4. Within two minutes, click
Connect Using Push Button screen.
Connect to a Wireless
.
Connect on the Quickly
8