Troubleshooting - Omcan PM-IT-0004 Mode D'emploi

Notes:
• Never use the machine with any missing, disassembled or open guards and shields.
• If servicing operations require repairs to electrical system and/or replacement of bearings or mechanical
components, call an expert technician or your local dealer.
PROBLEM
Machine Operation Failure.
Product gets stuck when being
poured out.
The product looks unacceptable
even after the initial minutes; it
breaks and loses flour.
The product does not come out
from the drawplate.
REFERENCE
Item Number Model Number
13320 PM-IT-0004
CAUSE
Disconnected plug.
Plug leads not correctly connected. Check lead connections.
Trip switch adjusted for insufficient
values.
Unsuitable trip switch.
The security hook on the pool
cover is not inserted properly.
Dough too humid is used.
Too short kneading time.
Too reduced water percentage.
The blocking of the drawplate
because of dried dough.
Description
Pasta Machine 9 LB / 4 KG per Hour
0.5 HP / 373 W 110V/60/1
11
Maintenance

Troubleshooting

REMEDY
Connect plug.
Adjust trip switch accordingly.
Replace trip switch.
Position the hook at the end of the
run.
Reduce the quantity of water used
for the dough respecting the above
mentioned percentage.
Increase the kneading time.
Increase the quantity of
water in order to respect the
aforementioned percentage.
Disassemble and clean the
drawplate.
Manufacturer Model Number
TR70