Troubleshooting - Omcan RS-CN-0004-P Instructions

Fault
The appliance is not
working.
The appliance turns on,
but the temperature is too
high / low.
The appliance is
unusually loud.
REFERENCE
Item Number Model Number
40535 RS-CN-0004-P
40536 RS-CN-0005-P
39594 RS-CN-0006-P
39595 RS-CN-0009-P
Probable Cause
The unit is not switched on.
Plug and lead are damaged.
Fuse in the plug has blown.
Power supply.
Internal wiring fault.
Too much ice on the evaporator.
Condenser blocked with dust.
Appliance is located near a heat source
or air flow to the condenser is being
interrupted.
Ambient temperature is too high.
Unsuitable foodstuffs are being stored
in the appliance.
Appliance is overloaded.
Loose nut/screw.
The appliance has not been installed in
a level or stable position.
Description
Refrigerated Pizza Topping Rail
3 x GN 1/3 and 1 x GN 1/2 Pan Capacity
110V/60/1 CE
Refrigerated Pizza Topping Rail
4 x GN 1/3 and 1 x GN 1/2 Pan Capacity
110V/60/1 CE
Refrigerated Pizza Topping Rail
5 x GN 1/3 and 1 x GN 1/2 Pan Capacity
110V/60/1 CE
Refrigerated Pizza Topping Rail
9 x GN 1/3 Pan Capacity 110V/60/1 CE

Troubleshooting

Action
Check the unit is plugged in correctly
and switched on.
Call your agent or qualified technician.
Replace the fuse (GB).
Check power supply.
Call your agent or qualified technician.
Defrost the appliance.
Call your agent or qualified technician.
Move the refrigerator to a more suitable
location.
Increase ventilation or move appliance
to a cooler position.
Remove any excessive hot foodstuffs
or blockages to the fan.
Reduce the amount of food stored in
the appliance.
Check and tighten all nuts and screws.
Check installation position and change
if necessary.
11
Manufacturer Model Number
THV1200/380
THV1400/380
THV1500/380
THV2000/380