Bypass/Mute; Tuner - Korg ToneWorks PANDORA PX4B Notice D'emploi

Master icon
Value graph
Program number display
You can also adjust the settings so that the L/M
buttons will adjust the master level. (See p.15)

3.Bypass/Mute

When you press the TUNE/BYPASS button, the
PX4B will be bypassed, and the original sound
will not be processed by any effect.
The effect chain will blink, and the display will
indicate "BYPASS" for approximately one second.
If you press and hold the TUNE/BYPASS button
for longer than one second, the output signal will
be muted.
The effect chain will blink rapidly, and the display
will indicate "MUTE" for approximately one sec-
ond.
14
Master level value
Bypass/mute will be turned off when you press
the TUNE/BYPASS button once again.
You can also return to Play mode by pressing the
EXIT button.
Bypass or Mute can also be entered from modes
other than Play mode.

4.Tuner

The tuner will operate when you bypass or mute.
meter
center mark
Play a single string on your bass. The LCD will
show the note name and the calibration. If the
pitch is more than a semitone higher than the
note name, a sharp symbol will appear at the
upper right of the note name.
The display area will act as a meter to show the
pitch.
sharp
note name
calibration