DLY (Delay Effect Modeling)
For each type, 1, 2, 3, 4 and 5 have different amounts of feedback.
The delay time is set by the interval at which you press the TAP button twice. The specified delay time
can be a maximum of 500 ms for SLAP or a maximum of 2 sec for MULTI, and can be checked by
holding down the TAP button.
SLAP1, 2, 3, 4, 5
DELAY1, 2, 3, 4, 5 Stereo delay.
PPDLY1, 2, 3, 4, 5 Dual-tapped ping-pong delay that pans the sound to
ECHO1, 2, 3, 4, 5
MULTI1, 2, 3, 4, 5
REV (Reverb Effect Modeling)
DRYAIR
Reverb that produces a sensation of dry air.
WETAIR
Reverb that produces a sensation of wet air.
ROOM1
Bright-sounding room reverb.
ROOM2
Mellow-sounding room reverb.
PLATE1
Tight-sounding plate reverb.
PLATE2
Bright-sounding plate reverb.
38
TYPE (L/M button)
Slap-type delay whose delay time is 1/4 of the interval
at which you press TAP.
left and right.
Tape echo simulation with a warm tone.
Dual-head tape echo simulation with special stereo
design. (creates a spacious reverberation.)
TYPE (L/M button)
VALUE (Value Dial)
Adjusts effect level.
(0...10.0)
VALUE (Value Dial)
Adjusts effect level.
(0...10.0)