Albrecht Tectalk Duro Mode D'emploi page 38

Key Tone
Use the UP or DOWN button to change the setting. Press the PTT or
FUNCTION button or wait for 5 seconds
to store your choice.
The Key Beep icon will appear when Key Beep is active.
Call Tone
tones and off.
To change the Call Alert melody, press the MODE button until the Call
icon displays.
Use the UP or DOWN button to change the setting. Press the PTT
or FUNCTION button or wait for 5 seconds to store your choice.
Dual Watch Mode
dual watch mode first select a radio channel as the primary channel.
To select the dual watch channel press the MODE button until the Dual
Watch icon and current setting appear Use the UP or DOWN button to
select the desired dual watch channel. Press the PTT or MODE button
or wait for 5 seconds to store your choice and activate the dual watch.
The radio display will alternate between the primary and dual watch
channels and the dual watch icon will appear.
To deactivate the dual watch press the SCAN button after
the FUNCTION button press.
If you press the PTT button whilst receiving a signal in Dual Watch
Mode the radio will transmit on the currently displayed channel. If you
press the PTT button when no signal is present the radio will transmit on
the primary channel.
38
If the Key Beep is activated, your radio will emit a
confirmation tone whenever you use the keypad.
You can activate or deactivate the key Beep as
required. To change the Key Beep setting, press the
MODE button until the Key Beep icon appears.
To alert other users to your message and gain their
attention you can send a Call Alert melody by
pressing the PTT button twice in quick
succession. There are five different call alert
Dual Watch mode allows you to monitor two
channels; a primary channel and the dual watch
channel. When a signal is received on either
channel the unit will pause for 5 seconds
before resuming the dual watch. To activate the
English