Albrecht Tectalk Duro Mode D'emploi page 36

Power High / Low
Use the UP or DOWN button to change the setting. Press the PTT or
MODE button or wait for 5 seconds to store your choice.
The High or Low icon will appear.
DTMF TONE
your initial message that might arrive before the audio of the other party's
is open to receive. This can be activated or de-activated. The default code
is 99999 and can be changed by PC programming.
Compander
radio with this compander deactivated. To change the setting, press
the MODE button until the Compander icon and current setting
display. Use the UP or DOWN button to change the setting. Press the
PTT or MODE button or wait for 5 seconds to store your choice.
The Compander icon will appear when Compander is active.
Scrambler
you to enjoy scrambled communications with radios. This can be
activated or deactivated.
To change the setting, press the MODE button until the scrambler icon
appears. Use the UP or DOWN button to change the setting. Press the
PTT or MODE button or wait for 5 seconds to store your choice.
The scrambler icon will appear.
36
This feature permits selection of the transmit
power level to High or Low.
To change the Power Level setting, press the
MODE button until the Power Level icon appears.
The DTMF tone is a kind of combinations of short
tones. The DTMF tone can preamble to the message
upon every press of the PTT button.
Selecting this allows the other party never to miss
If the compander is activated, your radio will
eliminate the background noise and generate
clearer sound by cutting off the high and low
frequencies. The users who prefer the
unrefined sound are recommended to use the
Your radio incorporates a voice scrambler using
band inversion method.
The scrambler is compatible with many a
scrambler used by other manufacturers, allowing
English