Publicité
Les langues disponibles
Les langues disponibles
out by unauthorised persons or changes made to the device could damage the
dust/waterproof capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5.
If the electrical cable is damaged, it must be replaced by the manufacturer, their
service department or somebody with similar qualifications in order to prevent
creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They
will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be
liable for the consequences.
Description
The CK501R frost shield is an electrical convector heater with a thermostat and is
protected against overheating. The light is illuminated when the frost shield is switched
on. The CK501R frost shield is intended to keep small domestic or similar spaces frost-free.
The heater may only be used when standing (never if it is mounted or lying down!) and
only for the purpose for which it was designed.
1. air outlet grill
2. pilot lamp
3. thermostat dial
4. air inlet grills
5. feet
Location and Connection
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
Select a suitable location for the device taking into account all the aforementioned
warnings in this manual
To use the heater, the feet, delivered separately in
the package, must be mounted on the heater. The
feet should be attached to the base of the heater
using the 4 self-tapping screws. Make sure they are
correctly positioned at the bottom of the heater.
26
Publicité
