Instructions For Care - Riester ri-vital Mode D'emploi

The data saved can be called up with the Print button, they are displayed in
chronological order. By pressing the Print button again in the Storage view the
measurement currently highlighted yellow is printed out.
Another measurement can be marked with the
the Print button.
Please switch on the printer!
In order to obtain an optimum printing result, the optional printer must be placed as
illustrated in the following pictures.

10. INSTRUCTIONS FOR CARE

10.1 Device:
The device, the finger sensor, the optional predictive thermometer (thermometer probe
and the slide compartment) should be cleaned with a soft, clean cloth.
Please use white spirit or isopropyl alcohol to remove heavy soiling. After cleaning the
device, shake the thermometer probe to remove excess solution. Thoroughly dry the
electric contacts of the thermometer probe.
Other agents, especially acetone-based substances, damage the housing or the display.
WARNING!
The holder of the slide compartment must only be cleaned with a soft, clean alcohol-
soaked cloth. No liquids must get inside the device.
PLEASE NOTE!:
This thermometer is supplied non-sterile. Do NOT sterilise this device with ethylene
oxide gas or heat, in the autoclave or with any methods that may cause damage to
materials.
ri-vital
INSTRUCTIONS FOR CARE
68
menu buttons and printed out with