Riester ri-vital Mode D'emploi page 70

E01 – System error during synchronisation
E02 – System error during calibration of the patient thermistor
E03 – System error during calibration of the preheating device thermistor
E04 – System timer error
E05 – Preheating device error
E06 – TFT communication error
E07 – Switch-off error
P01 – Probe configuration error (or no thermometer probe connected)
P02 – Patient thermistor instable for the direct mode or outside the valid range
P03 – Preheating device thermistor instable for the direct mode or outside the valid
range.
P04 – Patient thermistor instable for the predictive mode or outside the valid range.
P05 – Preheating device thermistor instable for the predictive mode or outside the valid
range.
P06 – The probe tip of the thermometer probe cannot be preheated.
D) The device does not contain any parts that can be maintained by customers.
E) For service work please contact your specialist dealer.
ri-vital
TROUBLESHOOTING
70