Riester ri-vital Mode D'emploi page 59

Pulse oximeters
Sensors:
Intensity:
Calibration:
Measuring range: SpO2 0-100% (display range: 0 - 99%)
Accuracy:
Accuracy:
Display: Oxygen saturation (updated values are displayed every second), pulse rate,
plethysmogram (amplitude is not proportional to the perfusion at the measuring site),
bar display, Perfusion display, Trend
Graphic: Plethysmogram with normalized amplitude, the amplitude is not an indicator
of perfusion of patients (see perfusion chart).
7.3 Pulse signal
With the pulse signal switched on, each detected pulse beat is indicated with a brief
acoustic signal. The signal's pitch changes with the value of the oxygen saturation. This
pulse signal can also be deactivated in the Settings menu.
Please note: no alarm function
PLEASE NOTE: no alarm function
ri-vital
PULSOXIMETRY
all PEARL sensors from the Riester program
Wavelengths: 660 nm (red)
890 nm (infrared)
3.8 mWmax.
functional saturation
Pulse 30-250 min-1
SpO2 Normal perfusion, no artefacts 1) 2)
+/- 2% between 70 - 100%,
not specified
Reduced perfusion 1) 3)
+/- 3% between 70 - 100%,
not specified
Movement 1) 4)
+/- 3% between 70 - 100%,
not specified
Pulse normal perfusion, no artefacts 5)
+/- 3 beats
Movement 4)
+/- 3 beats
Reduced perfusion 5)
+/- 3 beats
59