Intended Purpose - TESTO 512 Mode D'emploi

2. Intended purpose

24
2.
This chapter gives the areas of application for which the
product is intended.
Use the product only for those applications for which it was
designed. Ask Testo if you are in any doubt.
The testo 512 is a compact digital manometer with
temperature compensation for measuring the positive and
negative over-pressure and differential pressure of non-
aggressive gases. With the versions 2hPa, 20hPa and
200hPa, flow velocity can also be measured via a Pitot
tube.
The product was designed for the following tasks/
applications:
· Measurement on heating, ventilation and air conditioning
· Customer service and maintenance work
The product should not be used in the following areas:
· Areas at risk of explosion.
· Diagnostic measurements for medical purposes
info@Testo-Direct.com
Intended purpose
systems
www.
Testo-Direct
1.888.475.5235
.com