TESTO 512 Mode D'emploi page 32

5. Operation
32



info@Testo-Direct.com
5
Setting max/min pressure function:
The configuration modus is open,

Select the desired option with
with :
· · On: When printing current or recorded
measurement values, maximum and minimum
values of the parameters pressure and flow
(versions 2hPa, 20hPa und 200hPa only) are also
printed out.
· · OFF: When printing current or recorded
measurement values, maximum and minimum
values of the parameters pressure and flow
(versions 2hPa, 20hPa und 200hPa only) are not
printed out.
- and the set unit of temperature light up.
6
Setting temperature-pressure modus:
The configuration modus is open,

of temperature light up.
Select the desired option with
with :
· On: When printing current or recorded
measurement values, the temperature
measurement value is also printed out.
· · OFF: When printing current or recorded
measurement values, the temperature
measurement value is not printed out.
7
To set Auto Off:
Configuration mode is opened, AutoOff is lit.

Select the desired option with
with :
· on: The measuring instrument switches off auto-
matically if no button is pressed for 10min.
Exception: A recorded reading is shown on the
www.
display (Hold is lit).
· oFF: The measuring instrument does not switch
itself off automatically.
Testo-Direct
MaxMin lights up
/ and confirm
and the set unit
/ and confirm
/ and confirm
1.888.475.5235
.com