Intended Purpose - TESTO 0636 Mode D'emploi

2.

Intended purpose

Use the product only for those applications for which it was
designed. Ask testo if you are in any doubt.
The product was designed for the following
tasks/applications:
·Fast and non-destructive evaluation of material moisture
courses in woods and building materials.
Does not replace reference methods such as CM
method or Darr-Wäge (dry-and-weigh) method.
The probe is not calibratable.
· For connection to testo 635-1 (Art.-no. 0560 6351) and
testo 635-2 (Art.-no. 0560 6352).
The product must not be used in the following areas:
· Areas at risk of explosion.
Materials subject to electrical voltage.
Electric s s hock!
If in doubt, check whether the materials are
energized before the measurement (e.g. in the
event of water damage in walls)
2. Intended purpose 11