Publicité
Les langues disponibles
Les langues disponibles
6.
Lower the motor unit on to the processing lid. You may have to turn it slightly, to engage
the top of the blade unit.
7.
Put the plug into the power socket.
8.
Press the switch to start the motor, release it to switch off.
9.
It's best to run the motor in bursts of a few seconds at a time, and inspect the results
between bursts.
AFTER USE
1.
Unplug the appliance.
2.
Lift the motor unit off the bowl. Lift the processing lid off the bowl.
3.
Put a finger on top of the blade unit, to stop it falling out.
4.
Tip the processed contents out of the bowl.
5.
Alternatively, hold the plastic part of the blade unit, turn it to free it from the spindle
flanges, and lift it straight up and out of the bowl.
6.
Fit the storage lid to the bowl.
CARE AND MAINTENANCE
1.
Unplug the appliance.
2.
Wipe the outside of the motor unit with a clean damp cloth.
3.
Clean the inside of the blade unit with a toothpick.
4.
Hand wash the removable parts.
` You may wash these parts in a dishwasher, but the harsh environment inside the
dishwasher will affect the surface finishes. The damage should be cosmetic only, and should
not affect the operation of the appliance.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances,
appliances and rechargeable and non-rechargeable batteries marked with
one of these symbols must not be disposed of with unsorted municipal
waste. Always dispose of electrical and electronic products and, where
applicable, rechargeable and non-rechargeable batteries, at an appropriate
official recycling/collection point.
For recipes, please visit http://eu.russellhobbs.com/recipes/
4
Publicité
