Hearing Aid Compatibility; Memory Storage; Memory Storage Locations; Making And Receiving Calls - Clarity 435 Guide De L'utilisateur

Hearing Aid Compatibility

The handset has a special coil inside of it to
couple the sound to hearing aids equipped
with T-Switches/T-Coils.

MEMORY STORAGE

Memory Storage Locations

The Clarity 435 has 10 indirect (two touch)
memory locations on the telephone (0-9) that
can be programmed to dial frequently called
numbers up to 16 digits.
There are also three (3) EMERGENCY
BUTTONS located on the handset. These
storage buttons can be programmed with
numbers of up to 16 digits.
To Store Numbers into Memory:
1. Press the MEM button.
2. Dial the number you wish to store.
3. Press the MEM button again.
4. Press either the EMERGENCY BUTTON
or the NUMBER on the dial pad (0-9)
that you wish to store the number.
5. A long beep will indicate the pro-
gramming process is complete.
To Change a Number Stored into Memory:
Replace a stored number by programming a
new number in its place.
14
Operating Your Telephone
To Delete a Number Stored into Memory:
1. Press the MEM button.
2. Press the # key once.
3. Press the MEM button again.
4. Press the button for the memory loca-
tion you want to delete the number.
5. A long beep will indicate the process
is complete.
During the memory storage process the TALK
button will flash GREEN.
In the event of a power outage memory is
retained at least six (6) hours.
MAKING AND RECEIVING PHONE CALLS

Placing a Phone Call:

1. Press the TALK button. (TALK button
will illuminate green)
2. Dial the number you wish to call.
3. Adjust the rotary VOLUME CONTROL
to desired level.
4. Press the CLARITY POWER button
(activate the Clarity Power
Technology) to gain the extra level of
amplification, if needed.
Refer to Clarity Power ON/OFF and BOOST
ON/OFF for additional information on
volume controls.