Headset Operation; Hearing Aid Compatibility - Clarity Professional C2210 Guide D'utilisation

Operating Your Telephone
the C2210 for you until you dial another
phone number.
Lamp
(This function is only available with the
optional Lamp Flasher Notification
Accessory.) First connect the Lamp
Transmitter to the telephone and the
Lamp Switch to a nearby lamp. Press and
hold the LAMP button for 1 second to
turn the connected lamp ON or OFF.
Headset Jack
The unit includes a 2.5 mm headset jack
for connection of a headset. In the
headset mode, the volume of the head-
set is controlled adjusting the Clarity
Power Volume Control.

Headset Operation

Press the HEADSET button to enable
the headset mode. Dial as normal.
The HEADSET button will illuminate
to indicate the phone is in the
headset mode.You may switch
between headset and handset
usage by toggling the HEADSET
button.
Ordering a Headset
In the event you wish to purchase a
headset for your C2210, please contact
Plantronics at 1-800-544-4660 for loca-
tion near you. We recommend using the
Plantronics M110 headset.
Neckloop Jack
A 3.5 mm jack is available for connect-
ing a neckloop.The volume to the neck-
loop is controlled by the telephone.
When the neckloop is plugged in, the
handset speaker is disabled.

Hearing Aid Compatibility

The handset has a special coil inside of
it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.
Failsafe Power Operation
In the event of a power failure, you can
still make and receive calls, but the LCD
display, CID/PhoneBook operations,
Nightlite, and Extra Loud Ringer will not
function.The phone will ring, but not as
loud.
E
N
G
L
I
S
H
17