Winterizing - Jacuzzi J-LXL Manuel D'installation Et Utilisation Et Entretien

3. Flex pillow lip inward 2-3" to get a good grip on the ends.
4. Gently pull outward on pillow to release mounting stud from
receptacle on spa shell.
5. Wash pillow(s) in a mild detergent soap and warm water so-
lution. Never machine wash your pillows or attempt to clean them
with a non-approved vinyl cleaning agent!
6. To reinstall pillows: simply align pillow over mounting stud re-
ceptacle, then gently push inward to snap in place.
Remove and clean the headrest pillows as needed with
soapy water using a cloth or soft-bristle brush. Always
remove the pillows when adding chemical shock treat-
ment to the spa water. The pillows can be returned to the
spa when the sanitizer reading is stable as recom-
mended on the inside cover of the manual.
Maintaining the cover
Using the insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and main-
tenance requirements.
To prolong the life of the cover, handle it with care and clean it
regularly. Below are the care instructions.
Vinyl
1. Use a garden hose to loosen debris and dirt.
2. Using a large sponge or a soft bristle brush, use diluted or mild
soap and scrub the vinyl top. Rinse clean and do not allow soap
to dry on cover. Do not use soap on the underside of the cover.
3. Please check with your Jacuzzi Dealer for recommended cov-
er care and conditioning products. Condition using non-petro-
leum based conditioners to keep the vinyl supple and
threads/stitching from drying out. Do not use solvents, abrasive
cleaners or strong detergents. Do not use products that contain
silicone or alcohol.
Panel maintenance
The panels do not require any special maintenance. To clean them,
just wipe them with a clean cloth and a neutral detergent solution.
ATTENTION: do not direct jets of water against the panels,
since electro-mechanical parts are located behind them.
Top Rail Care And Maintenance
Parts should be cleaned with soap and water and a non-abra-
sive cleaning pad. More stubborn stains can be cleaned with a
water based cleaning solution or cleaners specified for vinyl
surfaces. Solvent based or aggressive degreasing cleaners
should not be used.
Small scratches or nicks resulting in the lighter colored sub sur-
face being exposed can be made less obvious by using common
furniture repair markers. These are generally available in packs
with several wood tones from which a close match can be se-
lected to the color of the scratched part.
Stainless Steel Corners
To prolong the life of the stainless steel, handle it with care and
clean it regularly. Below are the care instructions.
1. A simply solution of warm water with a couple of drops of liquid
soap makes an excellent cleaner.
2. Dampen a soft cloth (such as a microfiber cloth) into the clean-
ing solution.
3. Following the grain of the stainless steel, wipe and clean the s-
teel.
4. Dry off the stainless steel using another clean, dry soft cloth.
Note: Never use abrasive cleaners, steel wool, scrubbing brush-
es, or scrubbing pads on the stainless steel. Should scratches
occur, products are available at local home centers that can help
fix them.

Winterizing

I
Your Jacuzzi ® Premium spa is designed to automatically protect
itself against freezing when operating properly.
I D
uring periods of severe freezing temperatures, you should
check periodically to be certain that the electrical supply to the s-
pa has not been interrupted.
I
In extreme cold weather, choose the F3 "Standard" skim-
ming/heating mode to prevent freezing.
I
If you do not intend to use your spa, or if there is a prolonged
power outage during periods of severe freezing temperatures, it is
important that all water be removed from the spa and equipment
to protect against damage from freezing.
For expert winterization of your spa, contact your author-
ized dealer.
In emergency situations, damage can be minimized by taking the
following steps:
- Disconnect the spa from the electric mains.
- Follow the directions for draining the spa.
- Remove the water from the recessed seating areas and bottom.
- Position the massage switch in position A (combo).
B C
A
- Open the valve of the cascade with the correct knob.
- Remove the side panels and locate the drain plugs of the
33