Winterizing - Jacuzzi J-LXL Manuel D'installation Et Utilisation Et Entretien

5. Wash pillow(s) in a mild detergent soap and warm water so-
lution. Never machine wash your pillows or attempt to clean
them with a non-approved vinyl cleaning agent!
6. To reinstall pillows: simply align pillow over mounting stud re-
ceptacle, then gently push inward to snap in place.
Remove and clean the headrest pillows as needed with soapy
water using a cloth or soft-bristle brush. Always remove the
pillows when adding chemical shock treatment to the spa
water. The pillows can be returned to the spa when the san-
itizer reading is stable as recommended on the inside cover
of the manual.
Maintaining the cover
Using the insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and main-
tenance requirements.
To prolong the life of the cover, handle it with care and clean it
regularly. Below are the care instructions.
Vinyl
1. Use a garden hose to loosen debris and dirt.
2. Using a large sponge or a soft bristle brush, use diluted or
mild soap and scrub the vinyl top. Rinse clean and do not allow
soap to dry on cover. Do not use soap on the underside of the
cover.
3. Please check with your Jacuzzi Dealer for recommended cov-
er care and conditioning products. Condition using non-petro-
leum based conditioners to keep the vinyl supple and
threads/stitching from drying out. Do not use solvents, abrasive
cleaners or strong detergents. Do not use products that contain
silicone or alcohol.
Panel maintenance
The panels do not require any special maintenance. To clean them,
just wipe them with a clean cloth and a neutral detergent solution.
ATTENTION: do not direct jets of water against the panels, since
electro-mechanical parts are located behind them.
Top Rail Care And Maintenance
Parts should be cleaned with soap and water and a non-abra-
sive cleaning pad. More stubborn stains can be cleaned with a
water based cleaning solution or cleaners specified for vinyl sur-
faces. Solvent based or aggressive degreasing cleaners should
not be used.
Small scratches or nicks resulting in the lighter colored sub sur-
face being exposed can be made less obvious by using common
furniture repair markers. These are generally available in packs
with several wood tones from which a close match can be se-
lected to the color of the scratched part.
Stainless Steel Corners
To prolong the life of the stainless steel, handle it with care and
clean it regularly. Below are the care instructions.
1. A simply solution of warm water with a couple of drops of liquid
soap makes an excellent cleaner.
2. Dampen a soft cloth (such as a microfiber cloth) into the clean-
ing solution.
3. Following the grain of the stainless steel, wipe and clean the s-
teel.
4. Dry off the stainless steel using another clean, dry soft cloth.
Note: Never use abrasive cleaners, steel wool, scrubbing brush-
es, or scrubbing pads on the stainless steel. Should scratches oc-
cur, products are available at local home centers that can help fix
them.

Winterizing

I
Your Jacuzzi ® Premium spa is designed to automatically protect
itself against freezing when operating properly.
I D
uring periods of severe freezing temperatures, you should
check periodically to be certain that the electrical supply to the s-
pa has not been interrupted.
I
In extreme cold weather, choose the F3 "Standard" skim-
ming/heating mode to prevent freezing.
I
If you do not intend to use your spa, or if there is a prolonged
power outage during periods of severe freezing temperatures, it is
important that all water be removed from the spa and equipment
to protect against damage from freezing.
For expert winterization of your spa, contact your authorized
dealer.
In emergency situations, damage can be minimized by taking the
following steps:
- Disconnect the spa from the electric mains.
- Follow the directions for draining the spa.
- Remove the water from the recessed seating areas and bottom.
- Position the massage switch in position A (combo).
B C
A
- Open the valve of the cascade with the correct knob.
- Remove the side panels and locate the drain plugs of the pumps.
Remove these plugs to allow the water to drain out of the pumps
and heater.
Use a vacuum or other means to keep the water from flooding the
system compartment.
33