ENGLISH
Description and use
You have purchased a room temperature air curtain,
which is part of the AIR DOOR family.
The aim of this type of appliance is to create a curtain
of air across doors or openings in general, in order to
separate zones of different temperatures, by
preventing heat transfers between them without
limiting people or objects in terms of access.
These appliances are designed for industrial use,
where climatic separation between departments is
required (warehouses and production sites), in offices,
hospitals and laboratories, in the catering and
hospitality sector, and in bars, restaurants and shops
in general.
The AIR DOOR family consists of the following
models, in order of airflow:
AD900
AD1200
AD1500
AD2000
All models have two speeds and a remote control
which controls all functions: power on/off, minimum
speed and maximum speed.
All models are designed to operate with door opening
sensors ( Sensors not supplied)
Safety
Warning:
!
this symbol indicated the need to
take precautions to prevent the user from harm
• Do not use this appliance for functions other than
those described in this
• After removing the appliance from its packaging,
make sure that it is complete and undamaged. If in
doubt contact a Vortice authorised technical support
centre. Do not leave packaging within reach of
children or disabled persons.
• Certain fundamental rules must be observed when
using any electrical appliance:
- never touch appliances with wet or damp hands;
- never touch appliances while barefoot;
- do not allow the unit to be operated by
unsupervised children or disabled persons.
• This appliance should not be perceived as suitable
for use by persons (including children) with reduced
physical, sensory or mental capacities, or in any
case lacking the necessary experience and skills,
unless supervised or previously instructed in its
operation by an individual who is responsible for
their safety. Children must always be supervised to
ensure that they do not play with the appliance.
• Place the appliance well away from children and
disabled persons when it is to be disconnected from
the electricity supply and no longer used.
• Do not use the appliance where there are
inflammable substances and vapours (alcohol,
insecticides, petrol, etc.).
• Do not use in potentially explosive environments.
• Internal cleaning of the appliance must only be
carried out by qualified personnel.
10
booklet.
Caution:
!
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this
appliance.
• The appliance must be installed by a professionally
qualified technician.
• Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance;
contact your Vortice authorised technical support
centre immediately.
• The mains power supply to which the units are
connected must comply with current laws.
• The appliance must be connected to an efficient
earthing system.
• The electrical power supply/socket to which the
appliance is to be connected must be able to provide
the maximum electrical power required by the
appliance. If it cannot do so, contact a professionally
qualified technician.
• The appliance power supply should include a
thermomagnetic protection device.
• A multi-pole switch must be used to install the
appliance. The gap between the switch contacts
must be no less than 3 mm.
• Do not cover or obstruct the air inlet or outlet grilles.
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by your Vortice
authorized technical support centre.
• If the appliance does not function correctly or
develops a fault, switch it off immediately and
contact a Vortice authorised technical support
centre. Ensure that only genuine original Vortice
spares are used for any repairs.
• Position the fresh air inlet well away from sources of
pollution.
• Specifications for the power supply must correspond
to those on the appliance's electrical data plate.