Fujitsu SPARC Enterprise T2000 Guide D'administration page 77

2. Sélectionnez le nom du disque représentant le volume RAID que vous avez
configuré.
Dans cet exemple, c0t2d0 correspond au nom logique du volume.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c0t2d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@2,0
Specify disk (enter its number): 2
selecting c0t2d0
[disk formatted]
FORMAT MENU:
disk
type
partition
current
format
fdisk
repair
label
analyze
defect
backup
verify
save
inquiry
volname
!<cmd>
quit
- select a disk
- select (define) a disk type
- select (define) a partition table
- describe the current disk
- format and analyze the disk
- run the fdisk program
- repair a defective sector
- write label to the disk
- surface analysis
- defect list management
- search for backup labels
- read and display labels
- save new disk/partition definitions
- show vendor, product and revision
- set 8-character volume name
- execute <cmd>, then return
Chapitre 3 Gestion des volumes de disques 59