Festo 03 VIEA Serie Notice Simplifiee page 9

VIEA - 03/05
1
User instructions
The 2 A, PNP or NPN high current outputs are intended exclu-
sively for use with Festo valve terminals types 03...05. The spe-
cified limits in the technical data must be observed.
Detailed information can be found in the supplementary descrip-
tion of the I/O modules P.BE VIEA-03/05....
WARNING
• Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
• Connect a protective earth conductor with sufficient cross
section to the connection marked with
valve terminal is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a valve terminal which is completely fitted and
electrically wired.
9709 NH
, if the
9