Festo 03 VIEA Serie Notice Simplifiee page 14

VIEA - 03/05
5
Technical specifications
Electrical high current outputs (PNP or NPN),
Design
• HC OUTPUT
(type plate: VIGA-03-FB-4-PH)
• HC OUTPUT N
(type plate: VIGA-03-FB-4-NH)
Operating voltage (protected against incor-
rect polarity)
Voltage drop at switched output
Loading capacity
• per digital output
(bulb load or inductive load)
• parallel circuit permitted (max. four
high current outputs of a module)
Internal current consumption per module
Electronic fuse (short circuit/overload)
• trigger current
• response time (short circuit)
• short circuit recovery time
Electrical isolation
Integrated protective circuit for switching in-
ductive loads
• PNP limited to
• NPN limited to
Electromagnetic compatibility (EMC)
14
PNP semi conductor switch
(positive logic) as per IEC 1131-2
NPN semi conductor switch
(negative logic) as per IEC 1131-2
24 V ( 25%)
0.7 V
max. 2.0 A
Check for even loading
max. 100 mA
min. 2.5 A
See table chapter 2.3 min.
min. 1 s
Yes
approx. - 6 V related to 0 V
approx. + 12 V related to 24 V
Limit class:
see the "Electronics Manual" for
your terminal
9709 NH