Introduction - Dremel 3D20 Consignes D'utilisation/De Sécurité

2610035691 03-18 3D20_3D20 3/8/18 10:35 AM Page 12
Welcome to the world of Dremel 3D. Our
mission is to mentor you through the 3D
building process and share best practices for
bringing your ideas to life. 3D building is a
process that will involve experimentation and
Dremel 3D20
Spool Lock
Build Tape
*Do not store in moist or hot environment.

Introduction

Kit Contents
Instruction Manual
Power Cable
Object Removal Tool
12
persistence. Thankfully, the Dremel experts
are here to make your job easier with online
tips and live support. With Dremel, you can
build on your own ideas, build them better
and make them yours.
3D20 Quick Start Guide
READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE
WARNING WARNING
DREMEL 3D20 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS
MAY RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
Quick Start Guide
USB Cable
Unclog Tool
1 Filament Spool*
SD Card
Adjust the platform until
leveling tool slides between
the extruder and platform
with some resistance
0.3mm
TURN LEFT TO RAISE
THE BUILD PLATFORM
TURN RIGHT TO LOWER
LEVELING TOOL
Leveling Tool