Waldmann ATARO DUS Mode D'emploi page 35

Instructions For Use Uplighter DU(S/T/A) "ATARO"
ENG
Mounting - light head
Fig. 14
14.3
14.1
14.2
Light head assembly
See Fig. 14.
a) Unscrew both screws at the
centre cover in the light head.
b) Remove the cover.
c) Run the cables present on the
arm [14.2] plus plug through
the lateral opening in the light
chassis [14.1]. Caution: Do not
jam the cable!
d) Slide the arm [14.2] into the light
chassis [14.1] as far as it will go.
Note:
The light chassis has been placed
correctly if it has noticeably locked
into place.
Fig. 14a 14.3
14.1
14.1
Dismounting the light
Note:
To remove the light chassis [14.1]
again from the arm [14.2], the
two ends [14.3] of the arm [14.2]
must be crimped with pliers (see
Fig. 14a).
35