Waldmann ATARO DUS Mode D'emploi page 33

Instructions For Use Uplighter DU(S/T/A) "ATARO"
ENG
Mounting - desk mounted light (DUT)
Fig. 12
(DUT)
(Example only)
For Waldmann desk mounted
lights of the DUT "ATARO" series,
different combinations of the fol-
lowing three main components
are possible:
- Light head
- Column
- Desk fastening
Note!
When modifications are made to
the standard model, please note
the following:
¾ Not all combinations
are possible.
¾ Not all combinations meet the
requirements of the standard
model.
¾ Approvals by inspection authori-
ties such as VDE, SEV, etc. may
become void.
¾ When putting together your
components, always have a
Waldmann sales representative
advise you.
Mounting
For the information required for
mounting the light, please refer to
the mounting instructions for the
floor lights. They are enclosed with
the base of the light.
Any additional information may
be enclosed with the fastening
elementts used.
The light head is mounted as
described on page 35-37 of these
instructions for use.
33