Philips Cucina HR7633 Recettes & Mode D'emploi page 6

ENGLISH
6
Foodprocessor: parts and accessories
A) Speed control
B) Motor unit
C) Built-in safety lock
D) Bowl
E) Tool holder
F) Peg of lid (activates and deactivates the
safety switch)
G) Lid of bowl
H) Feed tube
I) Pusher
J) Cover with closeable insert storage space
K) Slicing insert medium
L) Shredding insert fine
M) Shredding insert medium
N) Insert holder
O) Blade (+ protective cover)
P) Kneading accessory
Q) Emulsifying disc
R) Spatula
Introduction
This appliance is equipped with an automatic
thermal cut-out system. This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running
1 Pull the mains plug out of the wall socket.
2 Press the 'PULSE / 0' button to switch the
appliance off.
3 Let the appliance cool down for 60 minutes.
4 Put the mains plug in the wall socket.
5 Switch on the appliance again.
Please contact your Philips dealer or authorised
Philips service centre if the automatic thermal cut-
out system is activated too often.
CAUTION: In order to avoid a hazardous
situation, this appliance must never be connected
to a timer switch.
IMPORTANT
SAFEGUARDS
Read the instructions for use carefully and look
at the illustrations before using the appliance.
Keep these instructions for use for future
reference.
Check if the voltage indicated on the
appliance corresponds to the local mains
voltage (110 - 127V or 220 - 240V) before
you connect the appliance.
Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips. Your guarantee
will become invalid if such accessories or
parts have been used.
If the mains cord is damaged, it must be
replaced by Philips, a service centre
authorised by Philips or similarly qualified
persons in order to avoid a hazard.