Yamaha DPX-1000 Mode D'emploi page 16

I Select an input
Press the INPUT button to display the input selection menu on the
screen. Use the h and g to select a name from those on display and
then press the to confirm your choice.
The signal settings for INPUT A, INPUT B and DVI will not
change. To change them, press the + button to open the submenu,
use the cursor buttons to select a suitable source from Component/
RGB PC/RGB TV, and confirm the selection by pressing the
button. You can select the terminal name directly from the input
area on the remote control.
STANDBY/ON
ESCAPE MENU
+
PATTERN SETTING
Enter
INPUT
ASPECT INPUT
LAMP COVER TEMP FAN
INPUT area
Input signal
VIDEO
S VIDEO
INPUT A
INPUT B
DVI
D4
AUTO
V. POS ZOOM FOCUS
IRIS SETTING PATT
ESCAPE MENU
ASPECT INPUT
LIGHT
STILL HIDE
INPUT
A DVI
S VIDEO
VIDEO B D4
MEMORY
1 2 3
4 5 6
RESET
Component
RGB PC
RGB TV
Input source The image signal to project
VIDEO Composite video signals input from an A/V component to
the VIDEO jack
S-VIDEO
S video signals input from an A/V component to the S
VIDEO jack
INPUT A <COMPONENT>
Component signals input to INPUT A (BNC jack)
<RGB PC>
RGB signals input from a computer to INPUT A (BNC
jack)
<RGB TV>
RGB signals input from an A/V component to INPUT A
(BNC jack)
INPUT B <COMPONENT>
Component signals input to the D-sub 15-pin connector
on INPUT B
<RGB PC>
RGB signals input from a computer to the D-sub 15-pin
connector on INPUT B
<RGB TV>
RGB signals input from a component to the D-sub 15-pin
connector on INPUT B
DVI <COMPONENT>
Digital component signals input from an A/V component
to the DVI connector
<RGB PC>
Digital RGB signals input from a computer to the DVI
connector
<RGB TV>
Digital RGB signals input from an A/V component to the
DVI connector
D4 VIDEO Component signals input from an A/V component to the
D4 video connector
N Note N
• Setting a laptop or notebook PC to display simultaneously
on its built in display and on an external monitor can cause
the image to be incorrectly displayed on the external
monitor. In this case, set the PC to display on the external
monitor only. Refer to the computer's operating instructions
for further details.
Basic Operations
13
E-