Fisher & Paykel RX216 Serie Instructions D'installation Et Guide De L'utilisateur page 30

Water filter
28
Replacing water filter
Important!
Air trapped in system may cause water and cartridge to eject. Use caution when removing.
Turn filter counterclockwise until it releases from filter head.
1
Drain water from filter into sink, and dispose in normal household trash.
2
Wipe up excess water in filter cover and continue with initial installation (page 27), steps 2
3
through 4.
Filter change and reset
The water filter needs to be replaced every 12 months, or after 750 gallons (2838 liters) have
been dispensed (which ever is sooner).
On RX216DT7XV2 models the filter icon
has been installed for 11 months or 90% of the rated water volume has been dispensed. This
is indicating that a new filter should be ordered. The
replaced.
To reset filter indicator, on RX216DT7XV2 models, access User Preferences menu (see page 15
and 16).
On RX216CT4XV2 models when it is time to replace the filter, the filter change light will turn red.
It will remain red until reset.
To reset filter indicator on RX216CT4XV2 models, press both
and hold for four seconds. Make sure green light flashes three times when indicator resets.
To purchase a replacement water filter cartridge (part number 13040210), contact your dealer or
call 1.888.9.FNP.USA (1.888.936.7872).
Important!
Condition of water and amount used determines the life span of water filter cartridge. If water
use is high, or if water is of poor quality, replacement may need to take place more often.
The dispenser feature may be used without a water filter cartridge. If you choose this option,
replace filter with blue bypass cap supplied.
will light up red on the display screen after the filter
will blink when the filter needs to be
and buttons at the same time,