Fisher & Paykel RX216 Serie Instructions D'installation Et Guide De L'utilisateur page 25

Ice and water
23
Dispenser pad
EN
The dispenser pad is located in the back wall of the dispensing area. When the dispenser pad is
pressed, the selection chosen on the dispenser control panel will dispense.
Removable tray
The removable tray at the bottom of the dispenser area is designed to collect small spills and
may be removed for cleaning and emptying purposes. It does not drain. Do not allow it to
overflow. If it does, remove tray and wipe up overflow.
Display and Dispenser Lock /
When the dispenser is locked, neither ice nor water can be dispensed.
RX216DT7XV2 models:
To lock the dispenser press and hold the button for two seconds (the display will also be
locked). The icon will be displayed on the screen.
Continuing to hold the button for another two seconds will unlock the dispenser but the
display will still be locked. The icon will be displayed on the screen. Holding button for
another two seconds, unlocks both the display and dispenser.
RX216CT4XV2 models:
To lock the display (external only) and dispenser press and hold the button for three seconds.
The green indicator light will illuminate above the button.
To unlock the display and dispenser press and hold the button for three seconds. The green
indicator light will go out.
Caution!
To avoid personal injury or property damage, observe the following:
Do not put fingers, hands or any foreign objects into dispenser opening.
Do not use sharp objects to break ice.
Do not dispense ice directly into thin glass, fine china or delicate crystal.
To dispense water /
Select / on the control panel.
Place your container against the back dispensing pad and press.
Release pressure to stop dispensing.
Or on select models:
Place container under dispensing nozzle.
Press FRONT FILL button.