Fisher & Paykel DW24U2I Guide D'utilisation page 32

PROBLEM
White stains are
left on dishes;
glasses have a
milky appearance
Dishes, cutlery
have not dried
Glasses have dull
appearance
Tea stains or
traces of lipstick
have not been
completely
removed
Traces of rust on
cutlery
Glasses clouded
and discoloured;
milky coating
Water marks left
on glasses and
cutlery
Hard water
30
TROUBLESHOOTING
POSSIBLE CAUSE
Not enough detergent.
Rinse aid dosage
too low.
Rinse aid dosage
too low.
Items removed
too soon.
Rinse aid dispenser
empty. (The rinse aid
indicators are lit.)
Rinse aid dosage
too low.
Not enough detergent.
Wash temperature
too low.
Cutlery is not
sufficiently rustproof
Hard water situation.
Glasses are not
dishwasher proof.
Rinse aid level or
dosage setting is
too low.
WHAT TO DO
See section 'Wash programmes and
detergent quantities' for recommended
quantities. You may need to adjust these
to suit the hardness of your water supply.
Increase rinse aid dosage.
See 'Using rinse aid'.
Increase rinse aid dosage.
See 'Using rinse aid'.
After the end of the wash programme,
leave the door ajar and wait for several
minutes to help drying.
Add rinse aid.
See section 'Using rinse aid' for instructions.
Increase rinse aid dosage.
See 'Using rinse aid'.
See section 'Wash programmes and
detergent quantities' for recommended
quantities. You may need to adjust these
to suit your particular load.
Select a wash programme with a
higher temperature. See section 'Wash
programme data' for information.
Wash by hand.
Increase detergent quantities.
Wash by hand.
Ensure there is rinse aid in dispenser.
If necessary, increase the rinse aid setting
or try using a wash programme with a
higher temperature. See sections 'Using
rinse aid' and 'Wash programme data'.
Increase the rinse aid setting and the
amount of detergent. See section 'Water
hardness and dishwashing'.
If living in an area with very hard
water, consult a plumber on installing a
household water softener.