Fisher & Paykel DW24U2I Guide D'utilisation page 14

User preference settings
These allow you to:
Change the rinse aid setting or turn rinse aid on or off.
z z
Turn the beeps on or off.
z z
Turn the cavity light on or off (DW24U6I models only)
z z
Turn the floor light on or off (DW24U6I models only)
z z
Change the rinse aid setting
Open the door to turn the dishwasher on.
1
Touch and hold
2
The display will show the current Rinse Aid setting.
– Rinse flashes when in preference option mode.
Touch to scroll between
3
rA-
(rinse aid off).
Touch Rinse to move on to the next setting or touch and hold
4
to exit the user preference menu.
Turn the Beeps on or off
This turns off all sounds on the dishwasher (except for fault alerts).
Make sure the dishwasher is on.
1
Touch and hold
2
menu. The display will show the current Rinse Aid setting.
Touch Rinse to scroll to the Beeps menu.
3
Touch to toggle between
4
Touch and hold
5
12
OPERATING INSTRUCTIONS
and Rinse until a beep sounds to enter the user preference menu.
rA1
(minimum dispense) to
and Rinse together until a beep sounds to enter the user preference
bPo
(Beeps On) and
until a beep sounds to exit the user preference menu.
rA6
(maximum dispense) or
until a beep sounds
bP-
(Beeps Off)