Yamaha NP-S303 Mode D'emploi page 44

❑
DMC Control
Enables or disables DLNA-compatible Digital Media Controllers (DMC) to control
playback.
Disable Disables DMCs to control playback.
Enable
Enables DMCs to control playback.
(default)
NOTE
• A Digital Media Controller (DMC) is a device that enables you to control other network devices
through the network. When this function is turned on, you can control playback of the unit from a
DMC, such as Windows Media Player 12 (that is on the same network as this unit).
❑
Standby (Network Standby)
Enables or disables the function that turns on the power to the unit from other network
devices.
Off Disables the Network Standby function.
Enables the Network Standby function. This setting will consume more power
On
than the "Off" setting.
Enables the Network Standby function. If the unit is not connected to a network,
Auto (default)
the function will be turned off automatically.
With an advanced energy saving design,
this product achieves a low power
consumption of not more than 2 watts when
in Network Standby mode.
44
En
❑
Network Name
Enables you to edit the the unit's name as displayed on other network devices.
1
Select "Network Name".
NET NAME
NP-S303 XXXXX
2
Press ENTER to display the edit screen.
NET NAME
NP-S303 XXXXX›
3
Use the cursor keys (/) to select the edit position, and then use
the cursor keys (/) to change the character.
You can insert or delete a character by pressing PRESET i (insert) or PRESET j
(delete).
4
Press ENTER to confirm the new name.
5
Press SETUP to complete the setting.
❑
Update (Network Update)
Updates the firmware via the network.
Executes firmware update. For more information, refer to "Updating the unit's
PerformUpdate
firmware via the network" (page 47).
Version Displays the current firmware version.
ID Displays the unit's system ID number.