Listening To Music Via Bluetooth; Playing Audio From Bluetooth Devices On The Unit - Yamaha NP-S303 Mode D'emploi

Listening to music via Bluetooth

MUTE MUTE DIMMER DIMMER
Playing audio from Bluetooth devices on
PRESET PRESET
the unit
1 1 2 2 3 3
You can play music files stored on a Bluetooth device (such as a
4 4 5 5 6 6
smartphone) on the unit.
7 7 8 8 9 9
10 10 MEMORY MEMORY HOME HOME
REPEAT REPEAT SHUFFLE SHUFFLE NOW PLAYING NOW PLAYING
NET NET USB USB BLUETOOTH
BLUETOOTH
• To use the Bluetooth function, set "Bluetooth" (page 45) in the Setup menu
ENTER ENTER
to "On".
• If you use the Bluetooth function, set the wireless antenna on the rear panel
in the upright position (page 19).
SETUP SETUP RETURN RETURN
• For information on supported Bluetooth devices, refer to "Supported devices
DISPLAY DISPLAY OPTION OPTION
and file formats" (page 53).
1
2
AMP AMP
INPUT INPUT VOLUME VOLUME
MUTE MUTE
3
This unit
NOTE
Press BLUETOOTH to select "Bluetooth" as the
source.
On the Bluetooth device, turn the Bluetooth function
on.
On the Bluetooth device, select the unit "NP-S303
XXXXXX Bluetooth" from the available device list.
"Connected" appears on the display and the BLUETOOTH
indicator lights up when the unit establishes a connection to
the Bluetooth device.
BT
Connected
• If you are prompted to enter a passkey, enter the number "0000".
• The initial network name of the unit is "NP-S303 XXXXXX".
• You can change the network name of the unit by using the "Network
Name" parameter under "Network" in the Setup menu (page 44).
• If the unit is registered as a MusicCast device, the room name will
appear on the available device list.
4
On the Bluetooth device, select a song and start
playback.
Bluetooth devices
(e.g., smartphone)
• If the unit detects a Bluetooth device that was previously connected,
the unit will automatically connect to the Bluetooth device after you
perform Step 1. To establish another Bluetooth connection, first
terminate the current Bluetooth connection.
• To terminate a Bluetooth connection, perform one of the following
operations:
– Disconnect from the Bluetooth device.
– Select any option other than "Bluetooth" as the source for this unit.
– Press and hold down the BLUETOOTH key for three seconds or
Wi Fi
BLUETOOTH
NOTE
NOTE
longer.
37
En