Updating The Unit's Firmware Via The Network - Yamaha NP-S303 Mode D'emploi

Updating the unit's firmware via the network

MUTE MUTE DIMMER DIMMER
New firmware that provides additional features or product
improvements is released as needed. If the unit is connected to the
Internet, you can download the latest firmware via the network and
PRESET PRESET
update it. For details on how to update, visit the Yamaha website.
1 1 2 2 3 3
NOTICE
4 4 5 5 6 6
• Firmware update takes about 5 minutes or longer (depending on your
7 7 8 8 9 9
Internet connection speed). Do not operate the unit or disconnect the power
cord or network cable during firmware update.
10 10 MEMORY MEMORY HOME HOME
REPEAT REPEAT SHUFFLE SHUFFLE NOW PLAYING NOW PLAYING
• A firmware update may fail due to insufficient Internet speed or other issues
related to wireless network connections. In this case, try to update the
NET NET USB USB BLUETOOTH BLUETOOTH
firmware later, or update it using the USB storage device (page 46).
1
Cursor keys
2
ENTER
ENTER
SETUP RETURN
3
RETURN
DISPLAY DISPLAY OPTION OPTION
SETUP
AMP AMP
INPUT INPUT VOLUME VOLUME
MUTE MUTE
4
5
NOTE
Press SETUP.
Use the cursor keys (/) to select "Network", and
then press ENTER.
Use the cursor keys (/) to select "Information",
and then press ENTER.
If new firmware is available, "NEW FW Available" will appear
on the front display.
NEW FW
Available
Press RETURN to return to the previous screen.
Use the cursor keys (/) to select "Update", and
then press ENTER.
UPDATE
PerformUpdate
NOTE
• To cancel the firmware update operation, press SETUP to exit the
Setup menu.
6
Press ENTER.
The firmware update starts.
7
When "UPDATE SUCCESS" appears on the display,
press A (power) on the front panel to turn off the
power to the unit.
The firmware update is complete.
Notice of new firmware available
If new firmware is available, "NEW FW Available" will appear on the
display for a short while when you turn on the power to the unit.
NEW FW
Update [ENTER]
To start the firmware update, press ENTER while this notice is
displayed. When "UPDATE PerformUpdate" appears on the
display, press ENTER. When "UPDATE SUCCESS" appears on the
display, press z (power) on the front panel to turn off the power to
the unit.
47
En