Rear Panel - Yamaha NP-S303 Mode D'emploi

Rear panel

ANALOG OUT DIGITAL OUT
COAXIAL
R
1
1
ANALOG OUT connectors
Output stereo analog audio signals. Connect the unit
to your amplifier or audio system using the RCA
stereo cable (supplied) (page 18).
2
DIGITAL OUT (COAXIAL) connector
Outputs digital audio signals. Connect the unit to
your amplifier or audio system using a coaxial digital
audio cable (commercially available) (page 18).
3
DIGITAL OUT (OPTICAL) connector
Outputs digital audio signals. Connect the unit to
your amplifier or audio system using an optical digital
audio cable (commercially available) (page 18).
4
NETWORK connector
Connect the unit to a network using a LAN cable
(commercially available) (page 19).
5
Wireless antenna
Use this antenna to connect the unit to a network
wirelessly (Wi-Fi) (page 21). It is also used to enable
the Bluetooth function (page 37).
NETWORK
OPTICAL
2 3 4
6
AC IN connector
Connect the supplied power cord here (page 20).
5
AC IN
6
* Illustration above shows Europe model.
15
En