Playing Audio From This Unit Through Bluetooth-Compatible Speakers Or Headphones - Yamaha NP-S303 Mode D'emploi

Playing audio from this unit through Bluetooth-
compatible speakers or headphones
You can listen to audio (that is being played on the unit) through Bluetooth-compatible
speakers or headphones. To do this, you will use the MusicCast CONTROLLER app
(installed on your mobile device) to transmit audio to Bluetooth-compatible speakers or
headphones.
Bluetooth-compatible
speakers/headphones
NOTE
• Use Bluetooth-compatible speakers or headphones that support the A2DP profile.
• You cannot use both a Bluetooth device (such as a smartphone) and Bluetooth speakers (or
headphones) at the same time.
• AirPlay or DSD audio will not be transferred.
• Examples of the MuscCast CONTROLLER screens are taken from an iPhone.
• Please also refer to the instruction manual for your Bluetooth device.
1
Use the MusicCast CONTROLLER app to connect the unit to a
network, and register the unit with MusicCast (page 21).
2
Use the MusicCast CONTROLLER app to play a song (via any device
other than a Bluetooth device).
3
Pair Bluetooth-compatible speakers (or headphones) and the unit to
establish a Bluetooth connection.
38
En
This unit
4
Tap in the MusicCast CONTROLLER app's playback screen.
5
Tap "Bluetooth Transmission".
6
Enable the Bluetooth Transmission function, and then select your
Bluetooth-compatible speakers (or headphones) as the transmission
destination.
When the connection is established, the unit's Bluetooth indicator will light up, and
audio will play from the Bluetooth-compatible speakers (or headphones).
7
Close the Setup screen.
NOTE
• To disconnect Bluetooth-compatible speakers (or headphones), perform one of the following
operations.
– Disconnect from the Bluetooth-compatible speakers or headphones.
– Disable the MusicCast CONTROLLER app's Bluetooth Transmission function.
– Select "Bluetooth" as the source for this unit.
Tap here.
Tap here.