Verifying The Network Connection Status - Yamaha NP-S303 Mode D'emploi

11
MUTE MUTE DIMMER DIMMER
PRESET PRESET
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
10 10 MEMORY MEMORY HOME HOME
REPEAT REPEAT SHUFFLE SHUFFLE NOW PLAYING NOW PLAYING
12
NET NET USB USB BLUETOOTH BLUETOOTH
Cursor keys
ENTER
ENTER
SETUP RETURN
RETURN
DISPLAY DISPLAY OPTION OPTION
SETUP
AMP AMP
INPUT INPUT VOLUME VOLUME
MUTE MUTE
Configure the Wi-Fi settings for your mobile device.
For more information, refer to the instruction manual for the
mobile device.
a Enable the Wi-Fi function on the mobile device.
b Select the unit's SSID (that you viewed in Step 5) from the
list of available access points.
c When you are prompted to enter a password, enter the
security key that you set in Step 9.
If "Not connected" appears, the entered security key may
have been incorrect. Set the Wi-Fi function on the mobile
device again.
Press SETUP to complete the setting.

Verifying the network connection status

Perform the following procedure to verify that the unit is connected
to the network (unless it is connected via Wireless Direct).
1
Press SETUP.
2
Use the cursor keys (/) to select "Network", and
then press ENTER.
NOTE
• To return to the previous screen, press RETURN.
3
Use the cursor keys (/) to select "Information",
and then press ENTER.
4
Use the cursor keys (/) to select "STATUS".
STATUS
¡Connect
If "Connect" appears, the unit has been connected to the
network. If "Disconnect" appears, establish the connection
again.
5
Press SETUP to complete the setting.
29
En