Télécharger Imprimer la page

Cola BEAUTY Manuel D'installation, D'utilisation Et D'entretien page 52

Publicité

Les langues disponibles
  • FR

Les langues disponibles

On accessing the menu it is possible to obtain the various types of displays and carry out the available settings
depending on the access level.
Given below is the table of controls and respective messages displayed during programming or setting operation
parameters :
Button
The Figure opposite describes the meaning of the status indicators in the left
part of the display.
Activation of one of the segments on the display signals activation of the
corresponding device according to the list opposite.
4.3 Lighting
4.3.1 Check before lighting
Before lighting the stove:
- make sure you have read and understood that given in the manual;
- the hopper must be filled with pellets;
- the combustion chamber must be clean;
- the brazier must be completely free, cleaned of any combustion residuals and correctly fitted in the brazier
holder;
- check hermetic closing of the fire door and ash pan;
- check the connection of the power cable and switching to ON/1 of the switch located on the back of the stove.
Description
Mode
PROGRAMMING
Increase
temperature
WORK/OFF
PROGRAMMING
Decrease
temperature
WORK/OFF
Setting/menu
PROGRAMMING
WORK
ON/OFF
reset
BLOCK
PROGRAMMING
WORK/OFF
Decrease
power
PROGRAMMING
WORK/OFF
Increase
power
PROGRAMMING
Action
Modify/increase selected menu value
Increase room thermostat temperature value
Modify/decrease selected menu value
Decrease room thermostat temperature value
Access MENU
Access next submenu level
Set value and go to next menu item
Press for 2 seconds to switch the stove on or off (if off or on)
Resets the stove and returns it to off status
Goes to higher menu level. The modifications made are
memorised
Modifies stove heat output
Go to next menu item
Return to next submenu item. The modifications made are
memorised
Modifies exchanger speed
Go to previous menu item
Go to previous submenu item. The modifications made are
memorised
52
BEAUTY ** - BEAUTY LUX **
external contact
chrono
igniter
auger
fume extractor
exchanger
not used
alarm

Publicité

loading

Ce manuel est également adapté pour:

Beauty lux