Technical Specifications; Appendix; Apwa Marking Colors - Amprobe A-5000 Mode D'emploi

tEChNICAL SPECIFICAtIoNS

Frequency:
Input Sensitivity:
Sensitivity Control:
Active/Reference Signal Sensitivity
Battery:
Battery Life:
Battery Test:
Weight:
Dimensions:
Operational Temp:

APPENdIx

APWA marking Colors

The following color markings have been established by the American Public Works Association (APWA):
Conductor
Electric power lines, cables, or conduits
Communication lines, cables, Conduits, CATV
Gas, oil, petroleum, or other gaseous materials
Sewers, storm and sanitary, drain lines
Water, irrigation, or slurry lines
If you have any questions regarding marking requirements or procedures in the United States, please call your local One Call
Center. International customers: please check with your local regulatory authorities or utility companies required color markings
may vary between different countries.
C onnec tor
Figure 9-1: A-5000 Receiver Battery Replacement
4.8 Hz Crystal Controlled
5 MV
Automatic
Logarithmic: 0 − 120
Linear: 0 − 999
9 V NEDA 1604 or equivalent
100 hr. continuous use
Automatic at power ON for 3 sec.
4.4 lb (2.0 kg)
32" H x 22" W x 1" D
(81 cm H x 56 cm W x 2.5 cm D)
-4°F − +120°F
(-20°C − +50°C)
Color
Red
Orange
Yellow
Green
Blue
17