Using The Enhanced Other Networks (Eon) Data Service - Yamaha RX-V565 Mode D'emploi

5
To search a station, press nCursor k / n on
the remote control.
If you press nCursor n, this unit searches
downward from the current frequency. If you press
nCursor k, it searches upward from the current
preset station.
When a station is detected, the search stops. If the
station is not the desired one, Press the same key to
continue the search.
To end the search, press mOPTION.
Note
• If "Not found" is displayed, no station applicable for the selected
program type is detected.
Using the enhanced other networks
(EON) data service
Use this feature to receive the EON (enhanced other
networks) data service of the Radio Data System station
network. Once you select one of the 4 Radio Data System
program types (NEWS, AFFAIRS, INFO or SPORT), this
unit automatically searches for all the available preset
stations that are scheduled to broadcast the EON data
service of the selected program type for a certain duration
of time. When the scheduled EON data service starts, this
unit automatically switches to the local station
broadcasting the EON data service and then switches back
to the national station once the EON data service ends.
y
• You can operate EON while looking at the video monitor screen.
1
Tune into the desired Radio Data System
broadcasting station.
2
Press mOPTION on the remote control.
The tuner option menu appears. For details on the
option menu, see page 35.
3
Press nCursor k / n on the remote control
to select "EON," and press nENTER.
"EON:OFF" appears on the front panel display.
Current frequency
EON:OFF
y
• When "No Presets" or "No Presets in Memory" is displayed it
means that no stations are registered. See page 29 and register
stations.
• If the affiliate station of the selected preset station or the EON data
service is not available, "Not Available" appears.
4
Press nCursor l / h to select a program
type.
NEWS AFFAIRS
OFF
INFO
SPORT
Radio Data System tuning (Europe and Russia models only)
5
After selecting a program type, press
mOPTION to end the option menu.
When an affiliate station starts broadcasting the
selected program, this unit automatically tunes in to
that station. When the program ends, it automatically
switches back to the previous station.
The EON is switches off in the following cases:
– when the EON is activated once
– when this unit is set to standby before EON is
activated
– when another station is selected before EON is
activated
y
• To cancel the EON, do steps 1 through 5 again and select
"EON:OFF."
31
En