Turn Off The Meter; Icons - OHAUS STARTER 5000 Manuel D'instructions

EN-6
3.2

Turn off the meter

To turn off the meter, please tap the turn-off button
the turn-off interface. Then tap
main interface again.
Turn-off interface
3.3

Icons

User ID
Sample ID
Information icon
Date
Time
pH measurement mode. Shift between mV and Rel.mV mode
Signal icon, when it is blinking that means the meter is receiving signal (in
measurement or calibration).
Endpoint icons, auto-endpoint, manual-endpoint and time-endpoint.
When in manual-endpoint, if the signal is stable, the meter will show the stable signal
icon. Tap the stop icon
Signal stable icon
Temperature icon.
STARTER 5000 Bench pH Meter
in the top-left of main interface to enter
to turn-off the meter or tap
to reach manual endpoint.
to go back to
or